Installed CBP box pad 

Single Phase Box Pad (Catalog Page)
Features & Benefits:

  • Light weight, yet built strong and durable for single phase transformers from 25kVA up to 167kVA.
  • Provisions for tie-down brackets.
  • No costly forms to set up, no cement needs to be poured, the fiberglass box pads reduce installation time by being built ready to go.
  • Bottom flange provides a stable footing for a level transformer installation.
  • Excellent stability in frost prone areas.

Guideline for determining product size

CBP-37-43-15A-MG-22x24 = 
37"W x 43"D x 15"H, MG=Munsell Green,
22x24=22”W x 24”D Top Opening

Product (Click on Part Number for a PDF Drawing)

CBP-37-43-15A-MG-22x24

CBP-37-43-15B-MG-20x20

CBP-37-43-15C-MG-21x12

CBP-37-43-15F-MG-25.5x30

CBP-37-43-24A-MG-22x24

CBP-37-43-24B-MG-20x20

CBP-37-43-24C-MG-21x12

CBP-37-43-24F-MG-26x30

GS-24-37-25-MG-16x24

GS-25-40-18-MG-15.5x11.5

GS-25-40-24-MG-14x10

GS-28-28-15-MG-20x20

GS-34-30-25-MG-22x18

GS-34-34-15A-MG-22x24

GS-34-34-15B-MG-20x20

GS-36-26-24-MG-24x12

GS-36-36-15-MG-22x22

GS-36-36-18-MG-24x24

GS-36-36-24-MG-25x25

GS-36-36-32-MG-25x25

GS-37-43-32A-CE-2-MG-26x32

GS-37-43-32B-CE-2-MG-20x20

GS-37-43-32C-CE-2-MG-22x24

GS-37-43-42A-MG-25x31

GS-37-43-48-MG-25x31

GS-37-46-15A-MG-22x24

GS-37-48-32A-CE-2-MG-26x31

GS-37-52-15-MG-23x24

GS-42-42-18-MG-25x25

GS-42-42-32-MG-25x25

GS-42-48-16-MG-26x12

GS-42-48-18-MG-25x25

GS-42-48-24-MG-26x12

GS-42-48-32C-MG-22x24

GS-42-48-32-MG-25x25

GS-42-48-32-MG-26x12

TP-42-42-5B-MG-28x13

TP-42-42-5-MG-12x20

TP-48-48-5-MG-25x13

CBP-37-43-15A-MG-22x24

CBP Series Box Pads for Single Phase Transformers (Catalog Page)

Features & Benefits:

  • Manufactured of Compression-Molded Fiberglass.
  • Fire retardant and UV additives are permanently molded in throughout the laminate.
  • Pigment is permanently molded into the fiberglass.
  • Nominal 3/16" laminate thickness.
  • Vertical ribs molded in to increase side wall stiffness.

GS-37-43-32A-CE-2-MG-26x32

GS Series of Box Pads for Single Phase Transformers (Catalog Page)

Features & Benefits:

  • Combination chopped glass spray up and hand lay-up with woven roving.
  • Produced from fire retardant resin.
  • Nominal 1/4" laminate thickness.
  • Vertical ribs molded in to increase side wall stiffness.
  • Exterior covered with a UV-stabilized surface coat.

TP-42-42-5-MG-12x21

TP Series of Box Pads for Single Phase Transformers (Catalog Page)
Features & Benefits:

  • Combination chopped glass spray up and
    hand lay-up with woven roving.
  • Produced from fire retardant resin.
  • Nominal 1/4" laminate thickness.
  • Light weight and easy to install.
  • Exterior covered with a UV-stabilized surface coat.
  • Heat or cold does not affect the fiberglass strength.