Replacement Ground Sleeve (Catalog Page)
  Features & Benefits:

  • Ground sleeve or transformer pad damaged?
  • These replacement ground sleeves can be installed directly over rusted metal ground sleeves or after removal of the damaged sleeves.
  • Front partition is removable for electrical cables to slide through during installation without disconnecting the power.
  • The two-piece units are joined by driving 3/8" stainless steel bolts into the floating nut assemblies on the sides and flange of the sleeve.

RGS-30-18-18-MG-21x10

RGS-30-18-18-MG-21x10

  • The RGS-30-18-18-MG-21x10 is a single-phase replacement ground sleeve and measures 30"W x 18D" x 18"H with a top opening of 21"W x 10"D.

RGS-61-18-18-MG-55x10

 

  • The RGS-61-18-18-MG-55x10 is a three-phase replacement ground sleeve and measures 61"W x 18"D x 18"H with a top opening of 55”W x 10”D.
  • RGS-61-18-18-MG-55x10 fits over most 61” wide x 18” depth ground sleeves.

RTP-42.5-45.7-7-MG-22x24

RTP-42.5-45.5-7-MG-22x24

 

  • RTP-42.5-45.5-7-MG-22x24 with a top opening of 22”W x 24”D fits over 42” x 42” transformer pads.

RGS-37-43-10-MG-24x30

RGS-37-43-10-MG-24x30

 

  • The RGS-37-43-10-MG-24x30 is a single-phase replacement box pad with measurements of 37"W x 43D" x 10"H with a top opening of 24"W x 30"D.
  • RGS-37-43-10-MG-24x30 fits over most 37” wide x 43” depth ground sleeves.

Product
(Click on Part Number for a PDF Drawing)

Per Pallet

Pallet Size
W x D x H

RGS-30-18-18-MG-21x10

25

29x41x72

RGS-61-18-18-MG-55x10

20

30x73x65

RTP-42.5-45.5-7-MG-22x24

15

54x51x82

RGS-37-43-10-MG-24x30

12

55x49x63

Loading