MPP Series Pedestals (Meter Plastic Pedestal) are an innovative approach to installing meters or other equipment to a plastic pedestal that does not rust or corrode.
This pedestal also has room inside for secondary connectors to be installed to the pedestal walls.
The MPP pedestals are manufactured by a rotational molding process. The overall body of the pedestal is made of a linear low density polyethylene.
The MPP-141480-MG-X is a direct burial meter plastic pedestal designed for RV Parks, Trailer Parks, and Townhouses.
This pedestal accommodates up to 3 meters or other equipment, see lower right picture. It can also be used as a secondary pedestal by ordering the MPP-141480-MG-L6350. This unit contains 3, factory installed 6 port lay-in 350 MCM connectors installed inside the pedestal. 350MCM connectors accommodate a wire range of 350MCM down to No. 10 wire. (Connector voltage and wire range chart)
Service entrance door is made of a high density polyethylene material with a smooth finish.
UV additives are permanently molded in the material.
Direct burial depth 30”, leaving 50” above grade.
It measures 14”x14”x 80” Tall.
Large service entrance door with stainless steel penta-head bolt surrounded by a pad-lockable penta-head cup for security.
It’s lightweight, only 35 lbs.
Easy to drill through material for mounting meters (meters not included).