GS-75-69-18RT-9K-MG-48x16

GS-75-69-18RT-9K-MG-48x16

GS-75-69-36RT-9K-MG-48x16

GS-75-69-36RT-9K-MG-48x16

3 Phase Box Pad Installation

Under 9,000lbs., and it fits...that’s it!

Three Phase Box Pad:
GS-75-69-18RT-9K-MG-48x16
GS-75-69-36RT-9K-MG-48x16

Features & Benefits: See Flyer

  • Nordic’s 9K box pads support transformers up to 9,000 lbs.
  • 9K box pads accommodate transformers that fit within the box pad’s flat surface area of 75” wide by 69” deep.  The transformer’s cable compartment must cover the box pad’s 48” x 16” top opening.
  • Lifting eyes are standard on these box pads making them easier to handle in the yard and in the field.
  • The large box pad interior cavity accommodates looping of extra cable for easier elbow operation.  In case of an elbow failure, the extra looped cable enables the line person to use the extra slack for installing a new elbow.
  • No more searching the yard or waiting for the factory to make one for you, just order a pallet of either the 18” or 36” high units or both.  These box pads will be there when you need them.
  • They are produced of fire-retardant resin and a combination of chopped glass spray-up and hand lay-up using 18 ounce woven roving glass reinforcement.
  • Multiple layers of chopped glass and woven roving glass are used to encapsulate plywood and 2x6’s, thus providing a rigid mounting surface for the transformer oil tank.
  • The down-turned lip around the top opening provides additional support for the weight of the transformer.
  • On the 36” high box pads, the steps are reinforced with 2x4’s, which are completely encapsulated in additional layers of chopped glass and woven roving glass. Vertical ribs are molded in below the steps for added strength.
  • The height of the box pads allows for excellent cable training and cable mobility for most three-phase transformers.
  • No costly forms to set up, no cement needs to be poured, the fiberglass box pads reduce installation time by being built ready to go.

Guideline for determining transformer box pad size

GS-75-69-18RT-MG-48x16 = 
75
"W x 69"D x 36"H,
RT=Reinforced Top
MG=Munsell Green,
48
x16=48”W x 16”D Top Opening

Product
(Click on Part Number for a PDF Drawing)

GS-75-69-18RT-9K-MG-48x16

GS-75-69-36RT-9K-MG-48x16

Loading