Ground-Sleeve-installed

Features & Benefits: (Catalog Page)

  • Fiberglass construction for long lasting corrosion free service life.
  • Light weight units can be pre-drilled to accommodate sectionalizing cabinets.
  • Rust free and very little maintenance is required.
  • Labor saver; most units can be easily lifted by one person and be installed the same day.

CGS-30-18-18-MG-21x10

Features & Benefits:
(CGS Single Phase Ground Sleeves)

  • CGS-30-18-18-MG-21x10 (compression ground sleeve) is manufactured of SMC (Sheet Molding Compound).
  • Fire retardant, UV additives and pigment are permanently molded in throughout the laminate.

GS-30-18-30-MG-21x10

Features & Benefits:
(GS Single Phase Ground Sleeves)

  • GS units are produced of fire-retardant resin and a combination of chopped glass sprayup and hand lay-up using 18 ounce woven roving glass reinforcement.
  • Standard ground sleeve have a 1/4” nominal fiberglass thickness for great strength.
  • M-Medium weight units have 3/16” nominal fiberglass thickness.

Guideline for determining product size:

CGS-30-18-18-MG-21x10=
C-Compression
GS-Ground Sleeve
 30"W x 18"D x 18"H
MG=Munsell Green
21
x10=21” x 10” Top Opening

 Single Phase Ground Sleeves          
(Click on Part Number for a PDF Drawing)

CGS-30-18-18-MG-21x10

GS-10-12-18-MG-6x8

GS-18-18-18M-MG-9x9

GS-19-10-18M-MG-15x6

GS-24-22-18M-MG-17x16

GS-24-22-30-MG-16x17.5

GS-24-24-30-MG-16x16

GS-25-15-18M-MG-16x10

GS-25-19-18M-MG-19x13

GS-26-15-18M-MG-19x8

GS-26-18-18M-MG-17x9

GS-27-20-18M-MG-17.5x11.5

GS-27-20-26-MG-18x12

GS-30-18-24-MG-20x9

GS-30-18-30-MG-21x10

GS-30-20-18M-MG-21x10

GS-30-20-30-MG-23.5x13

GS-31-10-36M-MG-27X6

GS-31-19-18M-MG-22x13.5

GS-31-23-18M-MG-22x18

GS-31-23-30-MG-22x17.5

GS-32-12-24-MG-24x4

GS-32-16-18M-MG-24x9

GS-32-16-30-MG-26x12

GS-34-25-24-MG-26x17

GS-35-20-18M-MG-25x11.5

GS-35-35-30-MG-27x27

GS-36-24-24-MG-31x19

GS-36-26-18M-MG-30x20

GS-37-23-18M-MG-28x18

GS-37-23-30-MG-27.5x17

GS-38-20-18M-MG-30x12