ND-2322248-MG-112-X-X installed

Single Phase Sectionalizing Cabinet (Catalog Page)
Features & Benefits:

  • Rust free fiberglass construction.
  • Copper ground systems and junction installations are available from the factory.
  • Hot-dipped galvanized, silicon bronze penta-head bolt, and stainless steel hardware.
  • Nordic cabinets are produced of fire-retardant resin and a combination of chopped glass spray-up and hand lay-up using woven roving glass reinforcement, which adds greatly to their strength.
  • The exterior is covered with Munsell green gel-coat, which contains UV stabilizer and provides superior weather-ability and resistance to ultraviolet attack. 
  • Meets ANSI C57.12.28 Pad-Mounted Enclosure Integrity Standard.
  • P-107 stainless steel locking system provides double locking.
  • Various model’s mounting plates accommodate a 2, 3 or 4 pt., 15/25kV, 200A junction.
  • The cabinets four eye-bolts allow the line-person to simply hook-up the cabinet, position it over the cables, and place it in the excavated area.

ND-2202248-MG-125-X-X

ND-22022 Series:

  • Accommodates a 2, 3, or 4 pt. 15 or 25kV 200Amp loadbreak junction.
  • Below parking allows for a 15/25kV 200A feedthru.
  • Ground Sleeve is designed for all types of terrain.
  • If cabinet is damaged, it is replaceable.
  • The cabinet can be used as a deferral cabinet with other box pads.
  • Typically installed as a one piece unit, the customer can unbolt the cabinet from the ground sleeve thus enabling the ground sleeve to be installed during construction without subjecting the cabinet to accidental damage.
  • After construction is over, the cabinet can be installed on the ground sleeve.

ND-2322248-MG-112-X-X

ND-23222 Series:

  • ND-23222 Series accommodates a 2, 3, or 4 point 15 or 25kV 200Amp loadbreak junction.
  • One parking stand on each side of the mounting plate allows for a 15 or 25kV 200 Amp feedthru.
  • Ground Sleeve is designed for all types of terrain.
  • If cabinet is damaged, it is replaceable.
  • Typically installed as a one piece unit, the customer can unbolt the cabinet from the ground sleeve thus enabling the ground sleeve to be installed during construction without subjecting the cabinet to accidental damage.
  • After construction is over, the cabinet can be installed on the ground sleeve.

Other Single Phase Cabinets:

    • The ND-120 is used for pad-mount applications.
    • Direct burial units; ND-130, ND-150, and the ND-301830 w/ground sleeve incorporate a wide flange for excellent stability in a variety of soil conditions.
    • In-line parking stands on the ND-301830 allow for stand-offs or feed-throughs to be installed on either side of the junction.

15/25kV 200Amp Cabinets
(Click on Part Number for a PDF Drawing)
 

Order
Key
(Click on Key)

Parking

Ground System

Mounting
Plate

Top Width

Top Depth

 Cabinet Height

Hot Stick Operating Depth

Recommended Burial Depth

ND-2202248-MG-125-X-X

Order-Key

Below

Electrical-Ground-Symbol

125

21

21

48

22

Finish grade approximately 6" below locking system.

ND-2322248-MG-112-X-X

Order-Key

In-Line

Electrical-Ground-Symbol

112

32.5

21

48

 20.5

15/25/35kV 600Amp Cabinet
(Click on Part Number for a PDF Drawing) 

 

 

ND-322864-MG-PA38-X-X

Order-Key

Above

Electrical-Ground-Symbol

PA38

38

29.5

64

25.5

15/25kV 200Amp Pad or GS Mount Cabinets
(Click on Part Number for a PDF Drawing) 

Order
Key
(Click on Key)

Parking

Ground System

Mounting
Plate

Top Width

Top Depth

 Cabinet Height

Hot Stick Operating Depth

Recommended Burial Depth

ND-120-MG-101-X-X

Order-Key

Below

Electrical-Ground-Symbol

101

23.5

25.5

35

 22

Pad Mount

ND-301830-MG-102A-X-X

Order-Key

In-Line

Electrical-Ground-Symbol

102A

30

19.5

31

 19

GS required

For other single phase cabinets, click here